Resin Worktops

Core

All solid surface worktops have moisture resistant particle board base supports.

Surface Finish

Resin (solid surface) material available ion the colours shown on our resin colour chart.

Length

Worktops can be supplied without joints up to 3600mm depending on colour. Joints are seamless and are not visible.

Depth

Standard depths of worktops are from 300mm to 650mm. Other depths can be accommodated in increments of 50mm to a maximum depth of 1200mm.

Fascia Height

A range of height from 20mm to 100mm depending on profile selected.

Faced Ends

Must be specified when ordering. Plain ends supplied 25mm oversized to allow for scribing to wall.

Subframe

Timber softwood frame is provided loose for site fixing by contractor, depending on profile of worktop.

Loose Upstand

Available in 50mm height as standard. Use for notching around columns, recesses and return walls as required.

Fixing Instructions

These worktops require specialist installation on site. Please contact us for details.