Timber Edged Worktops

Core

All postformed worktops have a moisture resistant particle board core as standard and a moisture resistant fibre board core is available as an option at extra cost.

Surface Finish

Laminate available in the colours shown on our colour chart. Linoleum available as an option at extra cost.

Length

Worktops can be supplied without joints up to 3600mm as standard (4100mm optional depending on colour and type of laminate).

Depth

Standard depths of worktops are from 300mm to 650mm. Other depths can be accommodated in increments of 50mm to a maximum depth of 1300mm depending on worktop profile.

Fascia Height

A range of heights from 20mm to 100mm depending on profile selected

Faced Ends

Must be specified when ordering. Plain ends supplied 25mm oversize to allow for scribing to wall.

Subframe

Timber Softwood frame is screw fixed to the underside of the worktop panel and fascia to profiles TB, TC, TE and TF.

Loose Upstand

Available in 50mm height as standard. Use for notching around columns, recesses and return walls as required. Upstands are secret fixed by screwing through the softwood subframeinto the worktop and upstand with No.8 CS woodscrews (requires drilling at a suitable angle). An alternative method for fixing is with screws and cups through the front of the upstand or with silicone adhesive.